Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Sold individually or as part of Problem Solvers' 6-bolt adapter assembly, this lock ring is meant for use with Shimano Center Lock compatible hubs. - External splines; compatible with external bottom bracket tools - For use with 12 – 20mm thru-axles - Aluminum construction

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 12.5mm long and made of durable chromoly.

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Problem Solvers' Cassette Cog Carrier (CCC) bolts on to a splineless single-speed cog to give you a wide, Shimano-splined cog to run on your freehub body. The wide profile won't damage your freehub body. Tech Details: Aluminum carrier with steel cogs

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.

The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Problem Solvers Pog top caps are machined aluminum with a 5 or 10mm spacer integrated as one piece. This makes for a clean, finished look when mounting a stem below the top of the steerer tube. - Bolt not included - 10mm available with or without logo - 5mm available without logo only

The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.

The Problem Solvers Universal Derailleur Hanger is a handy thing to keep on hand (and even bring on epic off-road rides or extended tours) because it makes it relatively easy to fix a damaged/bent derailleur hanger, which is a pretty common breakdown. This CNC-machined 6061-aluminum hanger takes the place of the drive-side quick-release nut providing a straight hanger to mount your derailleur to. You'll still be able to shift into many of your gears, too.

For riders who appreciate an elegant and streamlined setup, the Stem to Top Cap Tapered Spacer features a slight taper toward the top, allowing it to transition seamlessly to the Top Cap. - Anodized aluminum construction, no logos - Sold in packs of ten - 4mm outer diameter at base tapers to 32.5mm outer diameter at the top - S.H.I.S. Stem Clamp Diameter: 28.6