Parts & Accessories

$4.99
- Made in the USA
- Enables Take a Look Original Eyeglass Mirror to fit helmets
- Does not work with Take a Look Compact Eyeglass Mirror

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$139.99
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination.
Featuring:
- 600 Lumen Output Certified to the FL-1 Standard
- Daylight Visible Pulse Mode
- Integrated Battery Pack With Red Rear Lighting
- Innovative Amber Sidelights Provides Critical Side Visibility at Intersections
- Ultra-lightweight Setup With Easy Clip On/Off Design
- Waterproof to 1 meter For All-Conditions Reliability
- Accurate Battery Charge & Status Indicator
- Micro USB Rechargeable
Included:
- Helmet Mounts & Micro USB Charging Cable

$14.99
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$17.99 - $24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 34g
- MATERIAL: Polycarbonate

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$3.99
Strap divider for thin Lazer helmet straps
COMPATIBILITY
- Bullet 2.0
- G1 MIPS
- G1
- Z1 MIPS
- Z1
- Century MIPS
- Century
- Victor
- Wasp Air Tri
- Impala
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Compact, Compact DLX and Compact DLX MIPS helmets. Set includes three pads - front pad and two top side pads.
- COMPATIBILITY: Compact DLX MIPS, Compact DLX, Compact
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks

$34.99
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Technical Details:
- Fabric : Polyurethane-coated Carbon WR spandex
- Seams: Sealed seams: Keep you dry
- Visibility Features: Reflective accent

$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

$11.00
- Replacement Pads for Lazer's Blade, Magma, Elle, or Jade helmets
- X-Static pads are an anti-microbial, self-cleaning pad system

$29.99
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable.
- 12 Lumens
- Micro USB rechargeable
- 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours)
- Water Resistant
- 16 grams
- 26mm tall, 39mm wide, 20mm thick (w/o bracket)

$45.00
The ultimate commuter helmet cover combrines a fully reflective fabric, with water and wind protection.
- Sugoi's fully reflective and waterproof Zap fabric is designed for high visibility in low light
- Two sizes to offer a wider range of fit possibilities

$3.99
Strap divider for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads.
- COMPATIBILITY: Coyote MIPS, Coyote
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$17.99
Change ventilation options with a twist!
Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap.
COMPATIBILITY
- Century MIPS
- Century
- ATTACHMENT: magnetic
- WEIGHT: 28g
- MATERIAL: Nylon

$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Cameleon MIPS
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Z1 and Z1 MIPS helmets. Set includes two pads - front pad and one top center pad
COMPATIBILITY
- Z1 MIPS
- Z1
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements.
- GORE-TEX Product: durably waterproof, windproof and extremely breathable
- Reflective band
- Elastic hem
- Reflective logo
- Durably waterproof
- Extremely breathable
- All weather conditions
- Engineered for Cycling
- Weight: 0.8 ounces
Page 1 of 2
Next page