Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Planet Bike Dial Gauge Tire Gauge
$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
Topeak SmartGauge D2
$39.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Prestacycle Coil Hose
$29.95 - $39.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads. Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!
Prestacycle Prestaflator Digital Multipurpose Bicycle Inflation Tool
$79.95
The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Lezyne ABS Flex Hose (Presta/Schrader)
$12.99
- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
XLAB Starter Kit
$93.95
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Jandd Pump And U-Lock Tie
$4.95
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Prestacycle Schrader Hose Barb
$5.95
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Sunlite Thumb Lock End
$2.99
Replaces worn end on any pump hose. - Head Type: Schrader
Prestacycle Spin Head Hose
$9.95
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Sunlite Replacement Frame Pump Hose
$1.59
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
Lezyne Valve Extender
$14.99
Lezyne's Valve Extenders are necessary for deep-section rims. They allow you to inflate and deflate tires easily, and feature wrench flats for simple tightening.
Prestacycle Presta Head Rubber Gasket
$2.95
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Prestacycle Spin Head Rebuild Kit
$2.95
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Prestacycle Safety Blower / Low Pressure Inflator Tip
$5.95
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
GUP Industries Strap Holster
$4.00
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
Topeak TubiBooster
$69.95
2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum
Pro Pressure Checker Digital
$25.99
The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves
Serfas Tubeless System Combo Kit-Presta
$70.00
Serfas' Tubeless System Combo Kit offers the ultimate kit to go tubeless! Tire Medic Sealant and tubeless rim tape let you seal up your regular clincher rims so you can enjoy superior ride quality. Included in the kit is two Presta valves with removable cores, extra valve core, presta to schrader adapter and two fill fill tubes. There has never been a better time to go tubeless! • compatible with presta valves • includes: two 125ml sealant bottles, rim tape for two wheels with inner width of 15-17mm, presta to schrader adapter, two fill tubes, two presta valves with removable cores, presta key & extra valve core •sealant is co2 compatible • sealant will not freeze
Serfas Pump O-Ring
$3.00
Replacement O-ring for Serfas floor pumps
Topeak Valve Tool
$8.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Lezyne Smart Kit
$2.99
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
Prestacycle Angle Mini Presta Head
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Prestacycle Alloy Quick Coupler Kit
$12.95
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Crank Brothers Klic CO2 Inflator Head
$9.99
Klic Co2 head/cartridge adaptor replacement
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Page 1 of 4 Next page